HOW-TO STEPS

• 

  
  1

  WRAP OBJECTIVE
  The objective of this wrap is to create the open undulation of a natural finger wave pattern.

  ADORE 1 FLEX HAIR TECHNIQUE
  Note: Hair should be 6 inches or shorter to use this technique.
  
  PROCESSING TIME 
  Normal/Resistant:             
  Foam: 30-40 Mins   Water: 40 Mins

  Tinted/Highlighted<50%   
  Foam: 20 Mins        Water: 25 Mins

  Tinted/Highlighted>50%   
  Foam: 15 Mins        Water: 20 Mins

• 

  
  2

  For a foam wrap application, towel-blot hair and shake ISO Nexture bottle. Apply foam, thoroughly saturating and combing through to evenly distribute.
  
  For a water wrap, begin with towel-blotted hair. Take a 2- by 4-inch rectangular section from side part on left of head to corner of the right eye. Comb section back toward crown at 45 degrees. Using end paper, pinch and twist section.

• 

  
  3

  Insert flex tool and wrap toward hairline (half off base) and secure.

• 

  
  4

  Continue using a bricklay pattern, repeating steps 1 and 2.

• 

  
  5

  On the other side of the previous section and still using a 2- by 4-inch rectangular section, comb hair at 45 degrees in the opposite direction.
  
  Repeat steps 1 and 2, working toward the eye area.

• 

  
  6

  Using same rectangular section size and a bricklay pattern, pinch and twist each additional section. Insert tool, wrapping back and down toward the nape (off base).
  
  Repeat with remaining sections down to nape.

• 

  
  7

  Protect hairline with cotton. For both a foam and water wrap, apply ISO Nexture foam thoroughly over the rods, ensuring all are completely covered, top and bottom.
  
  Wait 5 minutes. Cover hair with enclosed plastic head cover and process under a preheated dryer. See process chart for timing.

  After processing, rinse with tepid water 10-12 minutes, depending on length and density. Towel-blot  thoroughly and remove tools. Style as desired. For best results, avoid shampooing or manipulating hair for 24 hours.

• 

  
  8