0
How-Tos > Blunt Fringe Cut and Ombré Color from Angelo Seminara
March 30, 2011

Blunt Fringe Cut and Ombré Color from Angelo Seminara

VIEW ALL PHOTOS VIEW SLIDESHOW
GET THE HOW-TO

Blunt Fringe Cut and Ombré Color from Angelo Seminara

If there’s one cut and color combination that is completely of-the-moment it’s this one that Angelo Seminara created for Davines. The silky, long strands with heavy, blunt fringe, paired with subtle ombré color…it’s current! It’s chic! It’s divine! Here’s the complete cutting and coloring how-to.

 

HOW-TO STEPS

  • 1

    Natural color: 6

    Begin by applying Davines Glorifying Treatment Pre Colour on the scalp and Protection Provider around the hairline. Divide the hair into approximately 5 cm horizontal sections.

  • 2

    Starting at the nape area, back comb every section with 3 or 4 movements, beginning halfway through the section.

  • 3

    In subsection A1, apply: 40g. Mask CPS 4,0 + 60g. Activator Source 10-volume on the root area for about 5 cm length.

  • 4

    In subsection A2, apply: 30g. L’Art Decolor White Hair Bleaching Paste + 45g. Activation Source 20-volume from the middle length of the section through the ends. Check visually up to 20 minutes.

  • 5

    Continue to back comb all the horizontal sections and repeat the techiniques and formulas from steps 2-4 until the entire head is complete. Wash thoroughly with Glorifying Shampoo Shimmering, than apply Glorifying Treatment Post Colour and finally, Glorifying Pak.

  • 6

    To achieve a peach effect on the lengths and ends, apply: 30g. L’Art Decolor White Bleaching Paste + 30g. Activation Source 20-volume + 7,5g. L’Art Decolor Toner Red + 7,5g. L’Art Decolor Toner Yellow. Check visually.

    To achieve a lemon effect on the lengths and ends, apply: 30g. L’Art Decolor White Bleaching Paste + 30g. Activation Source 20-volume + 15g. L’Art Decolor Toner Yellow. Check visually.

  • 7

    Start by dividing the hair into 5 sections.

  • 8

    Take semi-diagonal sections starting on the nape area and cut a horizontal square line.

  • 9

    When you get to the occipital bone start taking horizontal sections, extend it to the sides and cut square one length.

  • 10

    Repeat the same technique on the opposite side.

  • 11

    Cut the fringe by taking semi diagonal sections combing it down with a horizontal square line. Please note that the total look can be varied with no fringe—or a longer one—if desired.

  • 12

    Blow dry and style as desired. For a straight finish, prep hair with Davines Essential Haircare Melu Shield before flat-ironing.

    For a curly or beachy finish, use For Wizards N°14 Sea Salt Primer.

    For a shiny and natural finish, use Davines Defining Gloss Spray to add polish.

  • 13
  • 14

    See Angelo in his special Look & Learn Class “Vision Hair” on Sept. 26th in New Orleans
    Get your ticket now!