Last updated: November 07, 2017
VIEW ALL PHOTOS
VIEW SLIDESHOW
GET THE HOW-TO
Show Steps
3
Section the hair into quadrants. Working in 1/8-inch slices for control, apply Formula A to the new growth, leaving out 1/8 inch at the root. “If there is a lot of regrowth, hit the mids first, then go back to the root,” Ian says. “Otherwise, you’ll get a gold band.”
Show Steps
4
Completed regrowth application.
Show Steps
5
Lift the regrowth to a Level 8-9, then apply Formula A at the roots.
Show Steps
6
Completed root application.
Show Steps
7
When lift is achieved, wash the hair with BLONDME Keratin Restore Bonding Shampoo. Apply BLONDME Keratin Restore Bonding Mask for 2 to 3 minutes at the bowl, then rinse and blow-dry.
Show Steps
8
Section the hair as shown. It’s a forward teardrop section from the crown to just inside the eyebrows, then a horseshoe section at the middle of the head. For the bottom, create a zigzag parting.
Show Steps
9
Apply Formula B to the bottom section. In the middle section and top section, apply Formula B at the roots and ends ONLY. Process for 20 minutes, then rinse only—do not shampoo or condition.
Show Steps
10
Blow-dry and re-section the hair.
Show Steps
11
Apply Formula C to the entire bottom section, working in slices. Use foil to protect the client’s neck. Ian’s pro tip: Use Schwarzkopf Professional OSiS+ Undercoat as a barrier cream!
Show Steps
12
Release the middle section. Take a ¼-inch vertical slice at the hairline on one side and lay the hair tightly on a foil. Apply Formula C to the roots and feather down to the mids.
Show Steps
13
Apply Formula D from Formula C in the mids, feathering down as well. Finally, apply Formula C at the ends.
Show Steps
14
Use a Color Melter to help melt the colors together. Then, either sandwich with another foil, or fold the foil so each section of color lays on itself.
Show Steps
15
Take another slice right behind the first one. Repeat the same technique, using Formula E at the roots and ends and Formula F in the middle. After the first two foils, leave a ½-inch slice of hair out, then repeat the same technique. Each side of the head should have six foils and three slices without any color.
Ian's pro tip: He chose this color combination combination to avoid placing Formula C (Mauve) and Formula F (Yellow) together—if you know your color theory, you know that those two shades would cancel each other out, and the melt would be a brown shade.
Show Steps
16
On the slices that were left out, apply Formula C at the root, Formula E in the mids and Formula C at the ends, using a board for control and blending with a brush.
Show Steps
17
Release the top section and apply Formula C at the root, then Formula E in the mids and Formula C at the ends. Bring the root shade farther down in some sections for more variety and depth. Blend with the Color Melter, then process for 20 minutes.
Show Steps
18
Rinse the hair with cool water, then lightly shampoo with Schwarzkopf Professional BC BONACURE Color Freeze Sulfate-Free Shampoo. At the bowl, apply the Schwarzkopf Professional BLONDME Keratin Restore Intense Care Bonding Potion, and apply the BLONDME Keratin Restore Bonding Mask on top of the Keratin Restore Intense Care Bonding Potion. Leave on for 5 to 20 minutes, then rinse and towel-dry.
Show Steps
19
Apply Schwarzkopf Professional BC BONACURE Moisture Kick Spray Conditioner and OSiS+ Session Label Miracle 15. Blow-dry smooth with a paddle brush, then flat-iron the hair, finishing with OSiS+ Elastic Flexible Hold Hairspray.
Berry Sunset
Check out this subtle shine line and crazy-dimensional look from Schwarzkopf Professional‘s Ian Mayer-Marszalek created exclusively for BTC. The trick is to pre-tone specific sections only and to blend, blend, blend! Get the steps below.
Artist: Ian Mayer-Marszalek
HOW-TO STEPS
-
-
-
3
Section the hair into quadrants. Working in 1/8-inch slices for control, apply Formula A to the new growth, leaving out 1/8 inch at the root. “If there is a lot of regrowth, hit the mids first, then go back to the root,” Ian says. “Otherwise, you’ll get a gold band.”
-
4
Completed regrowth application.
-
5
Lift the regrowth to a Level 8-9, then apply Formula A at the roots.
-
6
Completed root application.
-
7
When lift is achieved, wash the hair with BLONDME Keratin Restore Bonding Shampoo. Apply BLONDME Keratin Restore Bonding Mask for 2 to 3 minutes at the bowl, then rinse and blow-dry.
-
8
Section the hair as shown. It’s a forward teardrop section from the crown to just inside the eyebrows, then a horseshoe section at the middle of the head. For the bottom, create a zigzag parting.
-
9
Apply Formula B to the bottom section. In the middle section and top section, apply Formula B at the roots and ends ONLY. Process for 20 minutes, then rinse only—do not shampoo or condition.
-
10
Blow-dry and re-section the hair.
-
11
Apply Formula C to the entire bottom section, working in slices. Use foil to protect the client’s neck. Ian’s pro tip: Use Schwarzkopf Professional OSiS+ Undercoat as a barrier cream!
-
12
Release the middle section. Take a ¼-inch vertical slice at the hairline on one side and lay the hair tightly on a foil. Apply Formula C to the roots and feather down to the mids.
-
13
Apply Formula D from Formula C in the mids, feathering down as well. Finally, apply Formula C at the ends.
-
14
Use a Color Melter to help melt the colors together. Then, either sandwich with another foil, or fold the foil so each section of color lays on itself.
-
15
Take another slice right behind the first one. Repeat the same technique, using Formula E at the roots and ends and Formula F in the middle. After the first two foils, leave a ½-inch slice of hair out, then repeat the same technique. Each side of the head should have six foils and three slices without any color.
Ian’s pro tip: He chose this color combination combination to avoid placing Formula C (Mauve) and Formula F (Yellow) together—if you know your color theory, you know that those two shades would cancel each other out, and the melt would be a brown shade.
-
16
On the slices that were left out, apply Formula C at the root, Formula E in the mids and Formula C at the ends, using a board for control and blending with a brush.
-
17
Release the top section and apply Formula C at the root, then Formula E in the mids and Formula C at the ends. Bring the root shade farther down in some sections for more variety and depth. Blend with the Color Melter, then process for 20 minutes.
-
18
Rinse the hair with cool water, then lightly shampoo with Schwarzkopf Professional BC BONACURE Color Freeze Sulfate-Free Shampoo. At the bowl, apply the Schwarzkopf Professional BLONDME Keratin Restore Intense Care Bonding Potion, and apply the BLONDME Keratin Restore Bonding Mask on top of the Keratin Restore Intense Care Bonding Potion. Leave on for 5 to 20 minutes, then rinse and towel-dry.
-
19
Apply Schwarzkopf Professional BC BONACURE Moisture Kick Spray Conditioner and OSiS+ Session Label Miracle 15. Blow-dry smooth with a paddle brush, then flat-iron the hair, finishing with OSiS+ Elastic Flexible Hold Hairspray.
-
-
More from
Schwarzkopf Professional®